NTAI06，NTAI06

NTAI06

 

NTAI06硬件調制法是為解決等面積法計算繁瑣的缺點而提出的，其原理就是把所希望的波形作為調制信號，把接受調制的信號作為載波，通過對載波的調制得到所期望的PWM波形.通常采用等腰三角波作為載波，當調制信號波為正弦波時，所得到的就是SPWM波形.其實現方法簡單，可以用模擬電路構成三角波載波和正弦調制波發生電路，用比較器來確定它們的交點,在交點時刻對開關器件的通斷進行控制，就可以生成SPWM波.但是，這種模擬電路結構復雜，難以實現精確的控制.
規則采樣法是一種應用較廣的工程實用方法，一般采用三角波作為載波.其原理就是用三角波對正弦波進行采樣得到階梯波，再以階梯波與三角波的交點時刻控制開關器件的通斷，從而實現SPWM法.當三角波只在其頂點（或底點）位置對正弦波進行采樣時，由階梯波與三角波的交點所確定的脈寬，在一個載波周期（即采樣周期）內的位置是對稱的，這種方法稱為對稱規則采樣.當三角波既在其頂點又在底點時刻對正弦波進行采樣時，由階梯波與三角波的交點所確定的脈寬，在一個載波周期（此時為采樣周期的兩倍）內的位置一般并不對稱，這種方法稱為非對稱規則采樣.
 
規則采樣法是對自然采樣法的改進，其主要優點就是是計算簡單，便于在線實時運算，其中非對稱規則采樣法因階數多而更接近正弦.其缺點是直流電壓利用率較低，線性控制范圍較小.make offer hp/agilent 53132a   will consider any offers
make offer hp/agilent 53149a   will consider any offers
make offer hp/agilent 5347a   will consider any offers
make offer hp/agilent 5348a   will consider any offers
make offer hp/agilent 5350b   will consider any offers
make offer hp/agilent 5351b   will consider any offers
make offer hp/agilent 5352b   will consider any offers
make offer hp/agilent 5361b   will consider any offers
make offer hp/agilent 5364a   will consider any offers
make offer hp/agilent 5372a   will consider any offers
make offer hp/agilent 54007a   will consider any offers
make offer hp/agilent 54121a   will consider any offers
make offer hp/agilent 54123a   will consider any offers
make offer hp/agilent 54542c   will consider any offers
make offer hp/agilent 54615b   will consider any offers
make offer hp/agilent 54616c   will consider any offers
make offer hp/agilent 54620c   will consider any offers